The 18th International Conference on Asian Welding Technology and Applications was held in Nanning.
Release time:
2025-10-29
On October 25, the 18th Asian Welding Technology and Application International Symposium was successfully held in Nanning. The conference was co-organized by the Asian Welding Federation, the Belt and Road and BRICS Skills Development International Alliance, the China Welding Association, and the BRICS Plus National Science and Technology Innovation Alliance. It was co-hosted by the Nanning Welding Association and Guangxi Vocational College of Mechanical and Electrical Technology. More than 500 scholars, technicians, teachers, and students in the field of welding participated through a combination of online and offline channels.
On October 25, the 18th Asian Welding Technology and Application International Symposium was successfully held in Nanning. The conference was co-organized by the Asian Welding Federation, the Belt and Road and BRICS Skills Development International Alliance, the China Welding Association, and the BRICS Plus National Science and Technology Innovation Alliance. It was co-hosted by the Nanning Welding Association and Guangxi Vocational College of Mechanical and Electrical Technology. More than 500 scholars, technicians, teachers, and students in the field of welding participated through a combination of online and offline channels.

The picture shows the scene of the seminar.
Photo provided by Guangxi Vocational College of Mechanical and Electrical Technology.
This seminar, themed "Welding Technology Applications and International Integration of Industry and Education," primarily features four sections: keynote speeches, sharing on welding industry development and challenges, research and application of advanced technologies, and the coordination and standardization of welding talent cultivation and certification. Nineteen experts and scholars from over ten countries and regions, including China, India, Japan, Singapore, Malaysia, Thailand, Vietnam, Spain, and China's Hong Kong, delivered insightful presentations.
In the theme report section of the conference, Liu Zhenying, president of the "the Belt and Road" and BRICS International Association for Skills Development and vice president of China Welding Association, Xiong Huaping, deputy chief engineer of AVIC Beijing Institute of Aeronautical Materials Research, vice chairman of the Welding Branch of the Chinese Mechanical Engineering Society, and Lin Luchan, associate professor of Shanghai Jiaotong University, made relevant reports respectively with the titles of "BRICS Mechanism Promotes Technological Innovation and Skills Development", "Research and Development of Medium Entropy Alloy Brazing Material for Light Material Connection" and "Ultra fast Laser Micro nano Connection and Micro device Application".
In the "Development and Challenges of the Welding Industry" sharing session, Satyendra Mohan Mahajan, Chairman of the Asian Welding Federation and Secretary-General and Head of the Nuclear Energy Group at the Indian Energy Forum, delivered a report titled "Zero Emission Goals—Challenges Facing the Welding Industry," emphasizing that sectors heavily reliant on fossil fuels such as transportation, power, and industry are accelerating the development and application of green alternative energy sources. Sze Thiam Siong, Secretary-General of the Asian Welding Federation, presented on "Shaping the Future of Welding Technology," highlighting that the welding industry is on the brink of a transformative era. Kwok Lap Yuen, a welding and non-destructive testing expert from the Hong Kong Association of Applied Welding, shared a report titled "Hong Kong's Strategic Role in Asian Welding Quality: Applying International Standards in Infrastructure and Innovation," focusing on specific local application cases. Azraf Azman, Treasurer of the Malaysian Welding and Joining Society (MWJS), introduced the challenges and issues faced by MWJS as a national industry leadership body under the Ministry of Human Resources for the welding and related processes sector. Cao Hongxia, Secretary-General of the Welding Professional Committee of the China Petroleum Engineering Construction Association and Secretary-General of the Welding and Non-Destructive Testing Professional Committee of the Belt and Road and BRICS Skills Development International Alliance, presented a report titled "Empowering Enterprises and Supporting Vocational Education: The Work Approach of the Welding and Non-Destructive Testing Professional Committee of the Belt and Road and BRICS Skills Development International Alliance in Enhancing Teaching and Training Capabilities, Advancing Welding Technology, and Promoting International Cooperation and Development."
In the Advanced Technology Research and Application section, Liu Yanli, Director of the Sino-German Technology Department at Jinan Vocational College, and Lu Qinghua, Associate Professor at Shanghai University of Engineering Science, delivered reports titled "Magnetic Pulse Technology and Its Applications" and "SLM Forming Research on Multi-Phase Hybrid Reinforced Aluminum Matrix Composites," respectively. Cheng Hu, a Senior Expert at Wuhan Digital Engineering Institute, introduced the research achievement titled "Development of an IC Chip Bonding Tray Device Based on TRIZ Innovation Methodology." Dr. Wang Xun, an Assistant Researcher at Tianjin University, shared insights on "Ultrasonic Micro-Forging Assisted Laser Additive Manufacturing and Performance Evaluation of Hastelloy X." Professor Triyono, Head of the Education and Academic Department of the Indonesian Welding Society, presented a research report titled "One-Step Double-Action Friction Stir Welding (ODFSW)." Ma Tianli, Chairman of Guangxi Cony Technology Co., Ltd., highlighted the features and practical application cases of the company's industrial robot intelligent welding system without teaching.
In the session on the integration of welding talent cultivation, certification, and standards harmonization, Antonio Fernandez Perez, Global Business and Partnership Director of Seabery, Spain, delivered a presentation titled The Future of Welding Training: High Energy, Efficiency, and Quality. Shoichi Nomura, Technical Advisor of the Japan Welding Engineering Society, introduced the "JWES Welder Certification System and Welding Coordinator Certification System" of the Japan Welding Engineering Society. Muhammad Zaid Yuliyadi, an expert from the Indonesian Campus College of Muhammadiyah University of Surabaya, shared a report titled Indonesia's Ambition to Become a Global Resource Hub for Welding Talents. Selenge Baigali-Enkh, member of the Mongolian Materials Science and Welding Society, elaborated on "Quality Control and Relevant Standards for Pressure Pipeline Welding." Long Changmao, Vice Dean of the Intelligent Welding Technology College at Guangxi Vocational College of Mechanical and Electrical Technology and Chairman of the Nanning Welding Association, presented a report on Innovative Practices in 'Industry-Academia Integration and Mutual Empowerment' for Precisely Cultivating Modern Welding Craftsmen.
The symposium aims to introduce advanced welding technologies, intelligent manufacturing technologies, additive manufacturing and inspection technologies, enhance innovation capabilities in the welding field, share best practices and successful experiences in education, training, and the cultivation of technical and skilled talents in welding and intelligent manufacturing, strengthen international exchanges, cooperation, and talent development among experts, scholars, and industry practitioners in the technical and skilled fields, and promote the development of vocational education and training.

The picture shows the session of presenting membership certificates.
Photo provided by Guangxi Vocational College of Mechanical and Electrical Technology.

The picture shows the session of presenting committee member certificates.
Photo provided by Guangxi Vocational College of Mechanical and Electrical Technology.
During the international symposium, a ceremony was held to present certificates to the twenty-fifth batch of member institutions of the Belt and Road and BRICS Skills Development International Alliance, as well as certificates for members of the Welding and Inspection Professional Committee. Four new alliance member institutions and eleven new members of the Welding and Inspection Professional Committee were added.

The picture shows participants visiting the Intelligent Welding Center at Guangxi Vocational College of Mechanical and Electrical Technology.
Photo provided by Guangxi Vocational College of Mechanical and Electrical Technology.
After the meeting, domestic and international participants visited the Intelligent Welding Center of Guangxi Vocational College of Mechanical and Electrical Technology and the Ministry of Education-Swiss GF Intelligent Manufacturing Innovation Practice Base. They also observed the preparatory work for the Guangxi Selection Competition of the Welding Event in the Third National Skills Competition.
The Asian Welding Federation (AWF) was registered and established in Singapore in 2004 as an international non-profit organization. Its main purpose is to promote the advancement of welding technology in Asian countries and drive technological and economic development in the region through the exchange of scientific information and knowledge. The Asian Welding Federation is composed of welding societies, associations, research institutes, and related welding industry entities from various countries and regions across Asia. Currently, it has 12 member countries: China, India, Indonesia, Japan, South Korea, Malaysia, the Philippines, Singapore, Thailand, Vietnam, Myanmar, and Mongolia. (By Du Hongjie)
MORE INFORMATION
WELCOME TO CONSULT OUR PRODUCTS IN A TIMELY MANNER
CONTACT US
6th Floor, Workshop 3, Hongxiang Standard Factory Building, No. 2 Hongli Road, Nanning, Guangxi, China